![Brauniger IQ-MOTOR-eco Скачать руководство пользователя страница 21](http://html1.mh-extra.com/html/brauniger/iq-motor-eco/iq-motor-eco_operation-manual_2805322021.webp)
Operation Manual IQ-MOTOR-eco GPS
21
3.2 FL-Motor-2
FlyLink
Sensor Module
3.2.1 Device overview
Switch-on:
The device is
automatically
switched-on
by an internal motion sensor.
Switch-off:
The device is
automatically switched-off
, when for 30 minutes no RPM signal was received,
or when the flight instrument was turned-off.
FlyLink LED
Off = no connection to flight instrument
Green flashing 2“ = connected without RPM signal
Green flashing 4“ = connected with RPM signal
Remark:
if no connection to flight instrument is available,
the following notice is displayed on the flight instrument:
Battery Status LED
(flashing at the rhythm of Flylink LED)
Green = good
Yellow = battery should be replaced soon
Red = battery not sufficient for correct operation
The battery capacity of 2 AA Alkaline batteries is sufficient for more than 200 flying hours!
Remark:
at low battery capacity the following message
is shortly displayed on the flight instrument every
30 seconds:
FlyLink
LED
Battery
LED
Batterycomp.
Sensor
connections
Holder with
vibration damper
1
FL-Motor 2
1
BATT
10%
- 1
1
FL-Motor 2
1
suche
12345
- 1