Braun ThermoScan IRT 6510, Руководство пользователя

Страница: 8 / 28

6
3
4
Fit the probe snuggly into the ear canal, then
push and release the Start button .
The thermometer is ready to take temperature when the display
looks like the images.
The Braun lens filter indicator will blink to signal
one is needed.
To achieve accurate measurements, make sure a
new, clean Braun lens filter is in place before each
measurement.
Attach a new Braun lens filter by pushing the
thermometer probe straight into the Braun lens
filter inside the box and then pulling out.
Note: The Braun ThermoScan
®
will not work unless
a Braun lens filter is attached.
ExacTemp
TM
light will pulse while temperature is in progress. The light will
remain solid for 3 seconds to indicate that a successful temperature
reading has been achieved.
NOTE: If the probe has been properly inserted into the ear canal
during the measurement, a long beep will sound to signal the
completed measurement.
If the probe has NOT been constantly placed in a stable position in the
ear canal, a sequence of short beeps will sound, the ExacTemp
TM
light
will go out and the display will show an error message (POS = position
error).
See «Errors and troubleshooting» section for more information.
5