Page 24
6
L
i
f
t
In
s
ta
ll
ati
o
n
In
s
t
ruc
ti
o
n
s
Warnings and Lift
Operating Instructions
Decal 27204
Decal Application
WARNING
Affix Warnings and Lift
Operating Instructions decal
27204 and ADA Standee
and Interlock decal 19342 to
the vehicle door in a highly
visible location near the
control box as shown. Two
Courtesy Requested decals
are supplied to be posted on
the vehicle as desired.
Replace any missing, worn
or illegible decals!
7
ADA Standee
and Interlock
Decal 19342
The lift operator’s
manual must be
stored in the lift-
mounted manual
storage pouch at all
times. Failure to
follow this rule may
result in serious
bodily injury and/or
property damage.
WARNING
Owner's Manual
9
Be certain
the lift owner's
(operators) manual is in the lift
mounted manual storage pouch.
Passenger's Seat (Vans)
8
Reinstall passenger's seat in
suitable location using the
original (OEM) mounting
hardware
if previously removed.
Torque seat mounting hard-
ware per manufacturer's
specifications
.
Installation Notice
OPERATING
INSTRUCTIONS
19342
Standees must
stand at center of platform (fully inside
yellow boundaries), grip handrails and
lower head to clear door jamb header.
Lift Interlocks
vary in type and operation. Interlock
(if equipped) must be operated as
instructed by transit authority.
Read warnings and operate lift as
outlined on LIFT OPERATING
INSTRUCTIONS decal. Lift operating
instructions apply to wheelchair
passengers and standees.
Standee Instructions:
Interlock Instructions:
LIFT OPERATING
INSTRUCTIONS
• Read manual before operating lift.
• Load and unload on level surface
only.
• Engage vehicle brake before operating
lift.
• Provide adequate clearance outside of
vehicle to accommodate lift.
• Do not operate lift if you suspect lift
damage, wear or any abnormal
condition.
• Keep operator and bystanders clear
of area in which lift operates.
Whenever a wheelchair passenger
is on the platform, the:
• Passenger must be positioned
fully inside yellow boundaries
• Wheelchair brakes must be locked
• Roll stop(s) must be up
Failure to follow these rules may result
in serious bodily injury and/or property
damage.
WARNING
OPEN DOOR(S) AND SECURE
TO UNFOLD PLATFORM:
Stand clear and press UNFOLD switch
until platform stops (reaches floor level).
TO UNLOAD PASSENGER:
1. Load passenger onto platform and
lock wheelchair brakes.
2. Press DOWN switch until the entire
platform reaches ground level.
Release switch.
3. Press DOWN switch until roll stop
unfolds fully.
4. Unlock wheelchair brakes and unload
passenger from platform.
TO LOAD PASSENGER:
1. Load passenger onto platform and
lock wheelchair brakes.
2. Press UP switch to fold roll stop
fully. Release switch.
3. Press UP switch until platform stops
(reaches floor level). Release switch.
4. Unlock wheelchair brakes and unload
passenger from platform.
TO FOLD PLATFORM:
Press FOLD switch until platform
stops. Release switch.
CLOSE DOOR(S)
20271
U.S. Patent No. 5,261,779
Replace missing, worn
or illegible decals.
Failure to do so may
result in serious bodily
injury and/or property
damage.
Platform Angle Adjustment and Floor Level Adjustment
The platform angle and floor
level positioning of the bridge
plate (inboard roll stop)
must
be properly adjusted before
operating the lift with a
passenger
.
Adjust the platform angle as
detailed in
Platform Angle
Adjustment Instructions
on pages 26 and 27.
Adjust the floor level positioning
of the bridge plate (inboard roll
stop) as detailed on pages 37-39.
Note:
Clean surfaces with
isopropyl alcohol before decal
application. Use a clean cloth
or paper towel.
Do not
use
oily shop rags. Wipe surface
free of residue with dry
portion of cleaning cloth.
A generic Lift Installation
Checklist is provided as a final
installation checklist to be given
to your customer. The Lift
Installation Checklist is the last
page in this manual. Complete,
remove (tear out) and forward
the Installation Checklist to your
customer to confirm that this lift
has been properly installed.