
Operating instructions
ECOM
ix
the rinsing liquid from the mixing tank.
Filling the
ECOM
ix for rinsing
Rinsing
Draining the
ECOM
ix after rinsing
Request to remove residual water (only for systems
without rinsing bridge)
Figure 4.30:
Display during the rinsing process
Remove residual water (only for systems without rinsing bridge):
Lift the connected hoses to the highest point, so the water can flow into the mixing
tank.
Press the “F1” key after the water has been removed.
After pressing the “F1” key, the drain valve remains open for 20 seconds and the excess water is
discarded. The display then switches to the main menu.
Figure 4.31:
Display: Rinsing is finished
44
State: April 2021
4.9.1., I Manual ECOMix Original (EN), 7, F: M. Lorek, 06.04.2021