Page 25
continued
Repeat all previously listed inspection, lubrica-
tion and maintenance procedures at 750 cycle
intervals (or per vehicle maintenance schedule).
Consecutive
750 Cycle
Intervals
1500
Cycles
MAINTENANCE and LUBRICATION
Hydraulic Fluid (Pump) - Check level. Note:
Fluid should be changed if there is visible
contamination. Inspect the hydraulic system
F\OLQGHUKRVHVÀWWLQJVVHDOVHWFIRUOHDNVLI
ÁXLGOHYHOLVORZ
Inspect vehicle-to-ramp wiring harness
Mounting
Decals and Antiskid
8VH%UDXQ47K\GUDXOLFÁXLG([[RQ
®
Univis HVI 26). Do not mix with Dextron III or
RWKHUK\GUDXOLFÁXLGV&KHFNÁXLGOHYHOZLWK
UDPSIXOO\GHSOR\HG)LOOWRPD[LPXPÁXLGOHYHO
LQGLFDWHGRQUHVHUYRLUÀOOOLQHPROGHGLQUHVHU
-
YRLU'RQRWRYHUÀOO
Resecure, repair or replace or otherwise correct
as needed
Check to see that the ramp is securely an-
chored to the vehicle and there are no loose
bolts, broken welds, or stress fractures.
Replace decals if worn, missing or illegible.
Replace antiskid if worn or missing.
Содержание BF3248Y-2
Страница 21: ...Page 19 BLANK for LAYOUT...