Page 24
Perform all procedures listed in previous section also
1500
Cycles
continued
750
Cycles
MAINTENANCE and LUBRICATION
Clean and lubricate. Apply Light Oil - See
Lubrication Diagram
Apply Door-Ease. See Lubrication Diagram
Tighten, replace or correct as needed.
Correct as needed
Clean and remove debris or obstructions
,IGULIWVWRRIDVWDGMXVWDSSOLFDEOH'ULIW0LFUR
-
switch Cam so drift begins at reduced height.
Correct as needed
Blow out with air compressor
Clean and lubricate. Apply Door-Ease
5HVHFXUHDGMXVWPLFURVZLWFKHVUHSODFHGDP
-
aged parts or otherwise correct as needed.
Chains at gears and chain assist assemblies
Drive arm slot
Inspect drive arm pivot points (mounting
screws, nuts and bearings) for positive secure-
ment, wear or damage
Inspect drive arm slots for excessive wear or
damage
Clean ramp and ramp mounting area (ensure
no debris in area to obstruct stowing/stacking)
Cycle ramp and observe drift speed during
deploy and stow functions
Inspect ramp for wear, damage or any abnor-
mal condition.
5HPRYHVXEÁRRUSDQFRYHUDQGFOHDQGLUW
and other foreign debris
5HPRYHVXEÁRRUSDQFRYHUDQGOXEULFDWH
drive arm gear and cylinder gear rack
5HPRYHVXEÁRRUSDQFRYHUDQGLQVSHFW
3XPSPRXQWLQJEROWVIRUVHFXUHPHQWORRVH
or missing)
'ULYHDUPDQGJHDUUDFNZHOGPHQWWHHWK
IRUIRUHLJQREMHFWVZHDURUGDPDJHEHQW
deformed, misaligned), positive securement
and proper operation
*HDUUDFNZHOGPHQWSLQVHFXUHPHQW(FOLS
(loose or missing)
+\GUDXOLFF\OLQGHUKRVHVÀWWLQJVDQGFRQ
-
nections for wear, damage or leaks
+DUQHVVFDEOHVZLUHVWHUPLQDOVDQGFRQ
-
nections for securement or damage
5HOD\VIRUVHFXUHPHQWRUGDPDJH
0LFURVZLWFKHVDQGFDPVIRUVHFXUHPHQWDQG
DGMXVWPHQW
0LFURVZLWFKZLUHVDQGWHUPLQDOVIRUVHFXUH
-
ment or damage
Содержание BF3248Y-2
Страница 21: ...Page 19 BLANK for LAYOUT...