Navigating the User Interface
Home Screen
The
Home Screen
is where the control panel will be most of the time. This page is the central
hub for displaying all of the information available on the panel. While not interacting with the
panel, the
Home Screen
will automatically scroll through each configured zone. Inside of each
zone, the user will be able to see the number of configured relays, number of configured
sensors, current gas levels, configured analog outputs, and active or scheduled overrides. If
any relays are active as a result of a setpoint being exceeded, the gas responsible will change
colors from green to yellow to indicate this to the user. If the alarm setpoint is exceeded, the
gas responsible will change to red.
Persistent in the bottom left corner, the date and time will be shown. If an error or alarm
condition is present, this will be replaced with a “Silence” button to mute the alarm. The
“Settings” icon is in the bottom right corner. Tapping this icon at any time will prompt the user
for the passcode to access the
Settings Menu
. The dots at the bottom indicate the current
page number. Swiping left or right will allow the user to manually navigate to a particular zone.
Tapping anywhere inside of a zone will open the corresponding
Zone Screen
.
IOM03
Rev 1.1 – May 18, 2021
25
