Branson 3015h, Руководство пользователя, Страница: 43 / 454

42hW-201601
1
-
37
Chapter 1 General InformatIon 3015r(h)/3515r(h)/4015r(h)/f36r(h)/f42r(h) traCtor
1
Stop the engine and add clean water to the system.
Run the engine until its temperature reaches its
operating temperature. Then, stop the engine.
Then, add the specified anti-freeze to the system.
Add the anti-freeze to the “FULL” limit mark.
Start the engine and run it for 15 minutes.
Stop the engine and add the anti-freeze up to
the "FULL" mark.
Tighten the radiator cap.
Note: For efficient cooling, the dust grill of the
radiator should always be kept clean.
Remove any dust or oil from it and spread
any bent cooling fin straight.
7.
8.
9.
10.
11.
12.
13.
F42W146A
8.2.21 addInG antI-freeze
If the tractor is equipped with a cabin, turn the
heater control dial to the right end.
To release pressure, unscrew the radiator cap (1)
slightly. Then, unscrew it completely.
To collect coolant, place a container under the
drain hole. 1.
2.
3.
CaUtIon

never remove the cap when the coolant tem -
perature is over the boiling point. To release
pressure, unscrew the radiator cap (1) slight -
ly. Then, unscrew it completely.

never pour cold water or coolant onto the
hot engine. always use warm liquid until the
engine is sufficiently cooled down.
F42W144A
F42W145A
Remove the radiator drain cap (2) completely.
After coolant is completely removed from the radiator,
fit the plug and add clean water to the system.
Run the engine until its temperature reaches its
operating temperature.
4.
5.
6.
reServOIr capacITY 0.45 ℓ (0.12 u.s.gal.)