background image

90

GB

➀ 

Wash compartment (powder or liquid)

➁ 

Pre-wash compartment (powder)

Softener

Siphon

Loading your washing

Proceed as follows:

Open the machine

• To access the drum, pres the "Door" button

located just above the door.

Insert your washing

For optimum washing performance, sort and
fold your washing and then place it the drum,
distributing it evenly, without piling it up. Mix
large and small items together for optimum
spinning.

Close the machine

• Check that no item is caught in the door when

you close it.

• Close the door by pressing it gently.
•  Ensure that the door is locked. If it is not, a

safety system will prevent you from starting
your machine.

For your safety, the door is locked
throughout the washing cycle.

Dispensing the detergent

The amount of detergent to use depends on
the water hardness, how dirty the washing is
and how much washing there is.
Please refer to the dosage instructions on the
detergent pack.

Warning

: The detergent manufacturers'

recommendations are generally based on filing
the drum to the maximum. Adapt the dosage
appropriately for the weight of washing you are
inserting in the machine.
These recommendations will avoid too high a

dose of detergent, which can cause foam. Too
much foam can reduce your machine's
performance and increase the washing time
and the water consumption.

Detergents for woollens and delicate textiles.

Detergents for woollens and delicate textiles.
You are recommended to sue an appropriate
detergent to wash these types of textiles (avoid
putting such detergents directly into the drum
because some of these products can attack
the metal.

Loading the washing products

You can place liquid or powder in the
"WASH" compartment but should never
use liquid detergent for programmes
WITH a Pre-wash and/or WITH "Delayed
Start" (depending on the model).

Concentrated softener must be diluted
with warm water.

To fill the compartments properly, open
the detergent dispensing drawer to its
maximum extent.

Never fill beyond the MAX level.

Fig. 9

Содержание WFH1066K






















Отзывы: