86
GB
Your machine's surroundings:
If you are installing your machine next
to another appliance or a unit, we
recommend that you always leave a gap
between them to help the air to circulate.
On the other hand, we would strongly
advise you NOT:
- To install your machine in a damp,
poorly ventilated room.
- To install your machine in a location
where it could be splashed with water.
- To install your machine on a carpeted
floor.
If you cannot avoid this, take every
precaution against obstructing the air
flow to the base of the machine to
ensure good ventilation for the
machine's internal components.
Levelling:
Use a spirit level to check that the floor is
horizontal: maximum slope: 2°, i.e. a
discrepancy of approximately 1cm over the
width and 1.5cm over the depth of the
machine.
Adjusting the feet:
To ensure that your machine operates safely
and quietly, its feet must be fitted. Your
machine is supplied with two adjustable feet.
If your machine is unstable,
- Unscrew the white plastic lock nut,
- Screw or unscrew the adjustable feet until
your machine is perfectly balanced,
- Once the feet have been set, tighten the
bolt to retain your setting.
Preparing to install your machine
Installation under a worktop
Fig. 4
Fig. 5
If you wish to install your washing machine
under a worktop, you must remove the top
of the machine
(Fig. 5)
:
Ensure that your machine is not
connected to the electricity supply.
Unscrew and remove the two screws holding
the top at the back of the machine
Pull the top gently towards you to release it and
then lift and remove it.
