100
GB
Incidents that may arise
Incidents
The cycle does not start
Heavy vibrations during
spinning
The washing has not been
spun or has not been spun
enough
A pool of water forms
around the machine
The machine does not drain
The door will not open
The machine refuses to
accept the programme
Possible causes / remedies
• You have forgotten to press the "Start/Pause" button
.
• There is no electricity to the machine:
- Check that the plug is correctly connected.
- Check the circuit breaker and the fuses.
• The water tap is closed.
• The machine's door is not closed properly.
• The transport clamps have not been correctly removed from
your machine:- See the section on "REMOVING THE
TRANSPORT CLAMPS FROM YOUR MACHINE"
• The floor is not horizontal.
• The feet are wrongly adjusted or their nuts have come loose.
• You have selected a programme without a spin, for example:
"No spin".
• The spin safety system has detected that the washing is poorly
distributed in the drum:- Redistribute the items better and
programme a new spin.
First of all remove the plug from the socket or remove
the relevant fuse and close the water tap.
While your machine is operating, constant control of the water
level avoids any water overflowing. If, despite this, water is
leaking from the machine, it may be that:
• The drain hose hook is poorly positioned in the drain pipe.
• The connections for the water hose on the machine and at
the tap are not tight:- Check that the seals are in place and
that the connections are tight.
• You have programmed a "Hold and RInse".
• The pump filter is blocked:- Clean it (see the section on
"CLEANING THE FILTERS" for how to do this).
• The drain hose is kinked or squashed
• The programme has not finished yet.The door remains locked
throughout the whole of the programme.
• The "Child safety" system is active, (see the section on
"PROGRAMMING")
• You have interrupted a cycle while it is running. Cancel it (see
the section on "PROGRAMMING")
Some incidents may occur while you are using your machine; these are the points to check.
In general, whenever you notice an anomaly, it is advisable to stop the machine, unplug
the power cable and close the water tap.
