Brandt TE 1416 Series, Руководство пользователя

Страница: 40 / 44

40
PRODUCTS/ACCESSORIES
TO BE USED
. Small, hard-bristled brush.
. Safety pin
. Gentle scrubbing cream
. Cleaning sponge
. Commercially available
restorative product
. Gentle scrubbing cream
. Commercially available
specialised stainless steel
product.
Warning
It will be easier to maintain your hob if you clean it before it has completely cooled
down. However, never clean your appliance while it is in operation. Set all the electric and
gas controls to zero.
Tip
— It is better to clean the parts of the hob by hand rather than in the dishwasher.
— Do not use an abrasive sponge to clean your hob.
— Do not use steam cleaner.
3 / DAILY CARE OF YOUR APPLIANCE
MAINTAINING YOUR APPLIANCE •
WHAT TO DO
In the event that the spark plugs become
soiled, clean them using a small, hard-
bristled brush (non-metallic).
The crucible-shaped gas injector is locat-
ed in the centre of the burner. Be careful
not to obstruct it during cleaning, as this
will undermine the performance of your
hob. In the event of obstruction, use a
safety pin to unclog the injector.
If tough stains occur, use a non-abrasive
cream, then rinse with clean water.
Carefully wipe each part of the burner
before using your hob again.
The heating plate is protected by a black
coating, so you should avoid using any
abrasive products. After each use, wipe it
with a thick towel.
If the plate shows signs of rusting,
remove the rust (with an emery cloth, for
example) and restore the black coating
with a commercially available high-tem-
perature restorative product.
To clean the hob’s enamel, use a scrub-
bing cream. Polish it with a dry cloth.
Do not allow acidic liquids such as lemon
juice, vinegar, etc. to remain in contact
with the enamel.
To clean the hob’s stainless steel, use a
sponge and soapy water or a commer-
cially available special stainless steel
product.
MAINTENANCE.....
Of the spark plugs
and injectors
Of the pan sup-
ports and gas
burners
Of the electric
plate
Of the enamel or
stainless steel