Brandt TE 1416 Series, Руководство пользователя

Страница: 28 / 44

28
Width
56 cm
60 cm
55 cm
Depth
49 cm
53 cm
47.5 cm
Thickness
next
cabinet
5.8 cm
3.4 cm
Cut
cabinet
Dimensions
total above
the work top
Dimensions
total dimen-
sions below
the work top
1 / INSTALLING YOUR APPLIANCE
•
PROPER POSITIONING
Your appliance shoud be flush mounted in the
surface of a support cabinet that is a mini-
mum of three cm thick, made of a material
that resists heat or that is covered with such a
material.
So as not to disturb movement of cooking
utensils, there should not be to the right or left
or back any obstacle within 30 cm of the hob.
If a horizontal divider wall is positioned under
the hob, it should be placed between 10 cm
and 15 cm away from the top of the work top. In
any event, do not store aerosol cans or con-
tainers under pressure in any compartment
that may exist under the hob (See “Safety Rec-
ommendations ” chapter).
FLUSH MOUNTING
Follow the diagram (Fig. 01).
— Remove the pan supports, the burner cov-
ers and burner heads, noting their positions.
— Turn the hob over and carefully place it on
top of the opening in the cabinet so as not to
damage the knobs and spark plugs.
— To ensure a tight seal between the housing
and the work top, glue the foam seal along the
exterior edge of the housing before installing
the hob (Fig. 02).
•
48
cm
m
ini
3 cm mini
30 c
m m
ini
56 c
m /
26
,5 c
m
30 c
m m
ini
5,8
cm
mi
ni
7
0
c
m
m
in
i
Fig. 01
Fig. 02
Housing
Seal
APPLIANCE