49
English
The following table shows the images shown on the display for the cor-
responding alarm function:
NOTE: As soon as the frost alarm function is enabled, you will hear the
preset alarm and the Ice Alarm symbol flashed 30 minutes earlier if the
outdoor temperature is below -3°C.
You hear an alarm if the time reaches the set alarm time.
Set alarm
Press the “ALARM” button shortly so that the alarm time is displayed
for 5 seconds. Then press and hold the “ALARM” button until the hour
display of the alarm time starts flashing. Adjust the value with the
„UP“( ) or “DOWN”(
) buttons and confirm with the „ALARM“ button.
Switching off the alarm
•
The alarm stops automatically after 2 minutes if the device is
not operated. The alarm is re-activated on the next day.
•
Press the "SNOOZE" button briefly to enable the snooze func
-
tion, so the alarm will go off again after 5 minutes.
•
The alarm is stopped and re-activated the next day by pressing
and holding the "SNOOZE" button for 2 seconds.
•
The alarm is stopped by pressing the "ALARM" button and the
alarm is re-activated the next day.
Note: The snooze function can be used within 24 hours continuously. The
alarm symbol "
" flashes during the snooze time.
Alarm display image Description
Alarm switched off
Alarm switched on
Alarm switched on (including frost alarm func-
tion)
