Brammo 2013 Empulse, Руководство пользователя

Страница: 57 / 112

Maintenance
Servicing and Maintaining Your Empulse 55
Rear Shock
1. Spring pre-load - adjust the spring pre-load by rotating the two
pre-load rings:
•
counter-clockwise to decrease the pre-load.
•
clockwise to increase the pre-load.
To adjust the pre-load back to the original setting used during
manufacture, raise the rear wheel off the ground using a safety
stand or a hoist. Rotate the pre-load ring counter-clockwise until
it is loose the rotate the pre-load ring clockwise four turns.
2. Compression damping (Empulse R only) - rotate the adjuster
clockwise to stiffen the damping (+) and counter-clockwise to
soften it (-).
Note:
Factory setting= 18 clicks (2.25 turns) from full in position.
3. Rebound damping (Empulse R only) - rotate the adjuster
clockwise to stiffen the damping (H) and counter-clockwise to
soften it (S).
Note:
Factory setting= 1.25 turns from full in position.
Empulse.book Page 55 Thursday, June 27, 2013 11:03 AM