Brammo 2013 Empulse Скачать руководство пользователя страница 22

Страница: 22 / 112

Enabling the Drive System

Basic Operation and Riding

Basic Operation and Riding

Enabling the Drive System

PREPARATION

The Empulse has many safety features designed to keep the drive
system disabled until you are ready to ride. Before enabling the drive
system:

1. The ignition switch must be in On position.

2. The kickstand must be up.

3. The Start/Off switch must be in the On position.

The drive system on the Empulse will not be enabled unless these
conditions are satisfied. If the Empulse’s drive system is enabled and
one of these conditions is not satisfied, e.g., the kickstand is down,
the drive system will be disabled.

ENABLING THE DRIVE SYSTEM

1. Insert the key into the ignition switch.

2. Turn the ignition switch clockwise to the On position.

3. The Empulse start-up tone will sound and the indicator lights on

the instrument cluster will illuminate briefly as a system check.

4. The amber ON indicator will remain illuminated.

Note:

If the KICKSTAND DOWN message is displayed on the LCD, the

Empulse will not go into Drive mode.

5. It is recommended that you always make sure that the Empulse

is in N (Neutral) before engaging the motor controller.

Empulse.book Page 20 Thursday, June 27, 2013 11:03 AM

Содержание 2013 Empulse

















































































































Результаты поиска

Содержание 2013 Empulse

Отзывы:

Похожие инструкции для 2013 Empulse

Бренды по названию

Популярные бренды

Brammo 2013 Empulse, Руководство пользователя

Результаты поиска

Содержание 2013 Empulse

Отзывы:

Похожие инструкции для 2013 Empulse

Бренды по названию

Популярные бренды