BRAINTECH FM1000 series Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 30

BRAINTECH FM1000 series Скачать руководство пользователя страница 10

10

  3.    LAN Setup
  4.    WL-LAN Setup
  5.    UART Speed
  F1 Cancel        F4 OK

Only if the Network mode is set up as Wire LAN

Mode, selection is possible.

Curr Network
  1. I P 192.168.000.100
  2. GW 192.168.000.001
  3. SM    255.255.255.000
  4. DNS000.000.000.000
  1-4    EDIT address
  F1 Cancel        F4 OK      #:.

4. If you select the LAN Setup menu, the left-side

screen appears.
Use the number keys from 1 to 4 to select the item
that will change the address.

◆ Refer to the terminology guideline to be

informed of IP, GW, SM, DNS address.

Curr Network
  1. I P _
  2.GW 192.168.000.001
  3.SM    255.255.255.000
  4.DNS000.000.000.000
  1-4    EDIT address
  F1 Cancel        F4 OK      #:.

5. If you want to change the IP address, press the

number,

‘

1

’

.

The existing IP address will completely be deleted
and the cursor will appear at the first blank of IP
address.

Curr Network
  1. I P _
  2.GW 192.168.000.001
  3.SM    255.255.255.000
  4.DNS000.000.000.000
  1-4    EDIT address
  F1 Cancel        F4 OK      #:.

6. Use the number keys to enter the new IP address.

Use the # button to enter (.) in the middle of the
numbers.

Curr Network
  1. I P 199.000.000.000
  2.GW 192.168.000.001
  3.SM    255.255.255.000
  4.DNS000.000.000.000
  1-4    EDIT address
  F1 Cancel        F4 OK      #:.

7. After finishing the input and pressing F4 button,

the input will be completed and the screen will go
back to the Network Setup screen.
◆If you don

’

t enter the new address for more than

10 seconds, the existing address will be indicated
again.

Network Setup
    Changed!!

    Restarting ~~
    Wait a moment!!!

8. If you press the F4 button from the Network

Setup screen, the revised address will be saved and
the equipment will be restarted.

4.3.2 UART Speed Setup

MAIN Menu
  1.    Controller Setup
  2.    User Management
  3.    DB Management
  4.    Passwd change
  5.    Door Operation
  F1 Cancel        F4 OK

1. Press the number key,

‘

1

’

from the left-side

manager menu screen to enter into the
Controller Setup menu.

Controller Setup
  1.    Date/Time
  2.    Network Setup
  3.    Manage Mode
  4.    ETC Setup
  5.    Door Setup

2. Press the number key,

‘

2

’

from the Controller

Setup menu to select the Network Setup item.

«
...
8
9
10
11
12
...
»

Содержание FM1000 series































Отзывы:

Нет отзывов