Brähler Systems INFRACOM DOL7, Руководство по эксплуатации

Страница: 9 / 18

INFRA COM® DOL7
Copyright by Brähler ICS
9
Locking Mode
There are now three different locking modes selectable concerning the outgoing channel interlocking
function.
Standard
(This is the standard interlocking mode)
If the selected outgoing channel is occupied (“OCC.”) by another console and you
move the microphone switch to the ON position, then the microphone will remain
OFF. If the microphone switch remains in the ON position while the selected
channel is no longer occupied, the microphone is not switched on. You need to
move the switch again to activate the microphone.
Take-over
In this locking mode you can take over a channel automatically. If the selected
outgoing channel is occupied and you move the microphone switch to the ON
position, then the microphone is inactive firstly. In the moment the outgoing
channel changes to free, then your DOL7 console automatically takes over this
channel and activates your microphone.
No-Lock!
This mode allows switching on a microphone independent from the channel state.
You can switch on the microphone on the DOL7 console although if the selected
channel is occupied.
Select the Locking Mode
You can select the desired locking operating mode in the DOL7 set-up menu similar to the set-up of the
channel-language assignment or the phone type selection. The entry for the locking mode appears after the
channel-language assign menu. The following messages you can see in the display:
“LOCKING=Standard” or
“LOCKING=TakeOver” or
“LOCKING=NoLock!”
You can change the mode while pressing “Mode” and turning the “PRGM” rotary switch. Finally press “OK”.
The selected locking mode is stored on the chipcard with the other set-up data, if the set-up is saved on the
chipcard via the card menu.