Brady PAM 3000 Скачать руководство пользователя страница 7

Страница: 7 / 87

Printer-Applicator-System PAM 3000

A General Guide to the Documentation

Operator's Manual

The present manual contains information on the characteristics, features, functions, and use

of the Printer-Applicator-System

PAM 3000

The manual covers general information which is necessary for operating the printer as well as

information about accessibility to different components of the printer.

Furthermore the loading of media and ribbon and the configuration in setup will be explained.

In the appendices, you will find useful additional information, such as internal character sets of

the printer, interface specifications, comments on possible error messages and printer

maintenance.

Note the directions for use on recommended material and comments on maintenance in order

to avoid damage and premature failure of your printer.

Every effort has been made in the creation of this manual to provide as much information as

possible in an understandable manner.

We welcome your comments and suggestions regarding additions or corrections to improve

future editions of this manual. Please, let us know if you have any questions.

Important information contained in this manual is marked as follows:

WARNING !

Impending danger!

May cause death or physical injuries.

CAUTION !

Dangerous situation !

May cause equipment/material damage or data loss.

NOTICE !

Helpful additional information and tips for use.

Further Documentation

The programming of the

PAM 3000

printer is completely compatible to the programming of the

PAM 2000

. Therefore it is possible to use the information, that can be found in the manual

"Programming Instructions -

Apollo

Detailed information about service and maintenance are included in the "Service Manual" of

the

PAM 3000

(e.g. replacement of components, adjustment instructions, spare parts lists,

etc.)

Trademarks

Centronics

® is a registered trademark of Centronics Data Computer Corporation.

Macintosh-

Computer is a product of Apple Computer, Inc.

Microsoft

® is a registered trademark of Microsoft Corporation.

Bitstream

® is a registered trademark of Bitstream, Inc.

Speedo

is a registered trademark of Bitstream, Inc.

TrueType

is a registered trademark of Apple Computer, Inc.

Содержание PAM 3000
























































































Результаты поиска

Содержание PAM 3000

Отзывы:

Похожие инструкции для PAM 3000

Бренды по названию

Популярные бренды

Brady PAM 3000, Руководство оператора

Результаты поиска

Содержание PAM 3000

Отзывы:

Похожие инструкции для PAM 3000

Бренды по названию

Популярные бренды