Brady PAM 3000, Руководство оператора

Страница: 28 / 87

28 Printer-Applicator-System PAM 3000
Fig. 7a Preparation of the label supply hub
PAM 3000 is equipped with a rotating label supply hub, which is able to take up rolls with a
core diameter of 76 mm.
To take up these label rolls it is necessary to mount two adapters ( 3 ) onto the supply hub :
• Put the first adapter ( 3 ) onto the supply hub ( 2 ) and slide it to the wind plate ( 4 ) until it
blocks. Tighten the knurled srew ( 1 ).
• Put the second adapter onto the supply hub ( 2 ) and slide it against the wind plate until the
distance between the outer edge of the adapter and the wind plate ( 4 ) is a little less than
the width of the label roll. Tighten the knurled screw ( 1 ).
7 Media Loading
Preparation of the Label Supply Hub
1 2
3
1
3
4