MF2944/BIR3
Installation
4
6/6/2014
Bradley •
215-1373 Rev. P; ECN 14-00-006
1
Rough-Ins
Flush the supply lines before making
connections. Debris in supply lines will
cause the valves to malfunction.
Compliance and conformity to local codes and
ordinances is the responsibility of the installer.
A
Rough in 1/2" nominal copper tubing for hot
and cold supply lines through wall or floor at
dimensions shown .
B
Rough in 1-1/2" NPT drain waste connection
through wall or floor at dimensions shown .
11"
(279)
11"
(279)
7"
(178)
3"
(76)
1-1/2" NPT Waste Connection (Optional) -
3" From Wall - Stub Out 3"
7-1/2"
(191)
7"
(178)
1/2" Nominal Copper Tubing For Supplies (Optional) -
5" From Wall, Stub Out Min. 1-1/2"
7-1/8" (181) STD
6-1/8" (156) OBC
3-1/8" (79) JUV
9-1/2" (241) STD
8-1/2" (216) OBC
5-1/2" (140) JUV
5"
(127)
Finished Floor
1/2" Nominal Copper Tubing For
Supplies, Stub Out Min. 1-1/2" from Wall
7-1/2"
(191)
19-1/2"
(495)
1-1/2" NPT Waste Connection For Use With
1-1/2" Tubular P-Trap, Stub Out Min. 1-1/2"
(2) Appropriate Anchors and 3/8" Bolts
(Supplied By Installer) To Mount Bowl To Wall
Mounting Panels
24" (610) STD
23" (584) OBC
20" (508) JUV
28" (711) STD
27" (686) OBC
24" (610) JUV
2
Assemble Pedestal
MOUNTING
PANEL
1/4"-20 x 1/2"
PAN HEAD
SCREW
1/4"-20 x 1/2"
PAN HEAD
SCREW
5/16" I.D.
WASHER
LEFT
PEDESTAL
PANEL
UPPER
BRACKET
LOWER
BRACKET
CENTERLINE OF
FIXTURE
RIGHT
PEDESTAL
PANEL
A
Fasten the mounting panels to
the pedestal with four pan head
1/4"- 20 x 1/2" screws supplied .
B
Install the upper and lower brackets
to the pedestal panels with two pan
head 1/4"- 20 x 1/2" screws and
5/16" I .D washers supplied .
Washers are not utilized on back of mounting panels.
