3
Installation
S19-210B
Bradley •
215-1797 Rev A; ECN 14-05-001
1/13/2014
Dimensions
NOTE: All dimensions assume standard thread engagement. Variations in manufacturing
allow for +/-
1
⁄
8
" (3mm) per threaded joint. To find the tolerance of a dimension, add
the number of thread joints in between a dimension and multiply it by
1
⁄
8
" (3mm).
NOTE: Local codes may require the installation of a backflow prevention valve to complete
proper installation. Compliance with local codes is the responsibility of the installer.
Valve must be tested annually to verify that it is functioning properly. Backflow
prevention valves are not included with the fixture and may be supplied by the
contractor or purchased from Bradley Corporation.
15½" (394mm)
7
3
⁄
8
"
(187mm)
5¼"
(133mm)
6"
(152mm)
36"
(914mm)
41½"
(1054mm)
Ø
10¾"
(273mm)
