background image

Installation 

P.O. Box 309

Menomonee Falls, WI 53052 USA

800 BRADLEY (800 272 3539)

+1 262 251 6000

bradleycorp.com

WF2500 Series Terreon Classic
WF2600 Series Terrazzo
WF2700 Series Stainless Steel
WF2800 Series Bradstone
WF3200 Series Terreon Deep Bowl
TDB3100 Series Terreon Deep Bowl

WF3203

215-1833-10 Rev. A; ECN 17-00-006B
© 2017 Bradley
Page 1 of 2 

11/21/2017

WF2605

WARNING

Make sure that all water supply lines have been flushed and then completely turned off before beginning 
isntallation. Debris in the supply lines can cause valves to malfunction.

Turn OFF electrical supply to the unit before installation.

NOTICE

Main water supply to the unit should be "ON" at all times.

IMPORTANT

Read this installation manual completely to ensure proper installation, then file it with the owner or 
maintenance department. Compliance and conformity to drain requirements and other local codes and 
ordinances is the responsibility  of the installer.

Separate parts from packaging and make sure all parts are accounted for before discarding any packaging 
material. If any parts are missing, do not begin installation until you obtain the missing parts.

Product warranties and parts information may also be found under ”Products” on our web site at bradleycorp.com.

Содержание Bradstone WF2800 Series

























Отзывы: