Bradford White GAS-FIRED WATER HEATER, Инструкция по установке и эксплуатации

Страница: 19 / 28

19
THERMOSTAT ADJUSTMENT
160°F Control 180°F Control
Figure 2
The thermostat dial is set to its lowest temperature setting when shipped from the factory.
Remember that lower temperature settings are more energy efficient . Adjust the
temperature by turning the thermostat dial. It is suggested that the starting point setting not be
greater than the ” “ or “ “mark on the thermostat dial (approximately 120°F [ 48.9°C ]) as
indicated below. Rotate the thermostat dial clockwise to decrease the temperature
setting. Rotate the thermostat dial counter-clockwise to increase the temperature
setting. Adjust the dial until the minimum acceptable temperature is achieved (See figure 2
above for approximate temperature settings).
160°F Control 180°F Control
Figure 3
The thermostat dial is set to its lowest temperature setting when shipped from the factory.
Remember that lower temperature settings are more energy efficient . Adjust the
temperature by turning the thermostat dial. It is suggested that the starting point setting not be
greater than the “ ” mark on the thermostat dial (approximately 120°F [ 48.9°C ]) as indicated
below. Rotate the thermostat dial counter-clockwise to decrease the temperature
setting. Rotate the thermostat dial clockwise to increase the temperature setting.
Adjust the dial until the minimum acceptable temperature is achieved (See figure 3 above for
approximate temperature settings).