5. Advanced operation
5.2.5
Vertical image position
This menu item is only accessible when VGA input is selected.
To adjust the vertical image position
1. Bring up the OSD main menu.
2. Navigate to the
VGA
menu.
3. Enter the
V Postion
submenu.
The command bar
V Position
is highlighted and a small pointer appears to the left of it.
4. Set the vertical image position as desired and con
fi
rm.
5.2.6
Amplitude calibration
About Amplitude calibration
When Amplitude calibration is activated, the gain and offset of the analog signal will be calibrated to match
the analog input range ADC (required full dynamic signal).
To adjust the amplitude calibration
1. Bring up the OSD main menu.
2. Navigate to the
VGA
menu.
3. Enter the
Amplitude Calibration
submenu.
The automatic amplitude calibration is activated.
5.3
Display information
About display information
Your display model name,
fi
rmware release, monitor on time, backlight on time and signal info are available
in a dedicated submenu of the OSD menu.
To retrieve info about your display:
1. Bring up the OSD main menu.
2. Navigate to the
Exit
menu to make the information visible on the screen.
(451920611082)K5902070 MSMD-1119 & MSMD-1119-TS 05/12/2013
27
