3. Installation
1
Table stand option
2
Lower handle option
3
Right handle option
4
Left handle option
To prepare the stand/handle and rubber cap for cable routing
1. Route the cables through the appropriate cable gap in the stand/handle.
2. Route the cables through the rubber cap.
2
1
Image 3-6
Warning:
The protection against ingress of water IP33 will be void when installing the display without
the rubber cap.
3.2.3
Step 3: Cover removal
To remove the connector compartment cover
1. Loosen the screw
fi
xing the connector compartment cover.
2. Slide the cover downwards to remove it from the display.
1
2
2
Image 3-7
10
(451920611082)K5902070 MSMD-1119 & MSMD-1119-TS 05/12/2013