17
GB
conclusion THERMOPROGRAM will go back
to the status it was in prior to activation.
To delete remote control of the fixed-time
manual program, press the button .
The default setting for the fixed-time manual
programme is 1 hour at 20 °C.
Note. When the program is activated remo-
tely, the remaining time in the hour or day is
counted as a full hour or day.
24
6
18
15
22
18
24
26
20
22
28
Fig. 48
24
6
18
15
22
18
24
26
20
22
28
Fig. 49
24
6
18
15
22
18
24
26
20
22
28
Fig. 50
24
6
18
15
22
18
24
26
20
22
28
Fig. 51
Fixed-time manual programming by remo-
te control
15.1 - Ensure you are in MANUAL operating
mode.
15.2 - Set the desired temperature using
knob (fig.
47).
15.3 - Press button
once to set the
hours (fig. 48), twice to set the days (fig.
49).
On the display, instead of the current time,
the message h01 will appear if you are set-
ting the hours, or d01 if you are setting the
days.
15.4 - Press button
or
until you
reach the desired hours (fig. 50) or days (fig.
51) from 1 to 99.
15.5 - To save the set programme as a pro-
gramme which can be remotely activated,
press the button
.
16 - REPLACING THE BATTERIES
When the
indicator flashes on the
display, it means you have about 1 month to
replace the batteries (fig. 52).
When the
indication plus the
symbol appear on the display, the unit is no
longer operative and has set the heating and
air-conditioning system to OFF (fig. 53).
24
6
18
15
22
18
24
26
20
22
28
Fig. 52
TH125_ITF 24081800 01_07 15-01-2007 16:23 Pagina 17
