10
GB
P
R
6
18
15
22
18
24
Fig. 15
24
6
18
15
22
18
24
26
20
22
28
Fig. 16
P
R
6
18
15
22
18
24
Fig. 17
5.4 - Press the button
or
(fig. 18),
until the correct hour is reached.
5.5 - Press the button
to end the set-
ting procedure (fig. 19).
The colon between the hours and minutes
flashes to confirm the operation is complete.
In any case, if no button is pressed for 10 s,
the unit automatically exits this procedure,
saving the last data set.
6 - HEATING OR COOLING
PROGRAMS
Press the button (
) (fig. 20) to choose
the cooling (
) or heating (
) program.
The corresponding indication will come on.
In the cooling program, the temperature can
be set from 18 °C to 31 °C.
Over 31 °C, the system goes into shutdown
mode, which is indicated by the message
24
6
18
15
22
18
24
26
20
22
28
Fig. 14
After approximately 10 s, or if you press the
button, the display will show the time
and room temperature again.
Note. When reset button R is pressed, the
temperature differential returns to the ±0.2
°C default setting.
5 - SETTING THE CLOCK
5.1 - Press the button
(fig. 15).
The minutes digits flash.
5.2 - Press the button
or
(fig. 16)
until the correct minutes value is reached.
Each time the
or
button is pressed,
the digits on the display go up by one. When
you hold this button down, the digits on the
display increase slowly for the first 5 s then
the sequence of digits advances more quickly.
5.3 - Press button
(fig.17).
The hour digits flash.
P
24
6
18
15
22
18
24
26
20
22
28
Fig. 18
TH125_ITF 24081800 01_07 15-01-2007 16:23 Pagina 10
