14
GB
11 - STAND-BY MODE IN COOLING
PROGRAM
11.1 - Press the button
once (fig. 37).
The message OFF confirms that THERMO-
PROGRAM control of the system is bypas-
sed. For 5 s, the room temperature reading
disappears, replaced by
.
11.2 - To restore AUTOMATIC operating
mode, press button .
12 - TIMER-CONTROLLED PLANT
STAND-BY INTERVALS
To bypass the system (either with or without
the anti-freeze protection) for a few hours or
a few days, proceed as follows:
Programming in hours
12.1 - Ensure that the thermostat is set to
system bypass (with or without anti-freeze).
12.2 - Press the button
once (fig. 38).
The message h01 comes up on the display
in place of the current time.
For 5 s, the room temperature reading
disappears, replaced by
or the anti-
freeze temperature.
12.3 - Press the button
or
until the
desired number of hours is reached, from 1
to 99 (fig. 39).
freeze temperature, which can be changed
with the
or
button (fig. 35).
Any temperature can be chosen between 2
°C and 35 °C, and it will be maintained until
further adjustments are made or until a dif-
ferent operating mode is selected. The
default setting is 6 °C.
After about 5 s from the last operation, the
room temperature appears.
Without anti-freeze protection
10.2 - Press the button
twice (fig. 36).
The message OFF confirms that THERMO-
PROGRAM control of the system is bypas-
sed.
For 5 s, the room temperature reading
disappears, replaced by
.
10.3 - To restore AUTOMATIC operating
mode, press button .
OFF
24
6
18
15
22
18
24
26
20
22
28
OFF
Fig. 35
OFF
24
6
18
15
22
18
24
26
20
22
28
OFF
Fig. 36
OFF
24
6
18
15
22
18
24
26
20
22
28
OFF
Fig. 37
OFF
24
6
18
15
22
18
24
26
20
22
28
OFF
Fig. 38
TH125_ITF 24081800 01_07 15-01-2007 16:23 Pagina 14
