Bowflex TreadClimber TC5300 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 52

background image

Bowflex

®

TreadClimber

®

Service Manual

imPorTanT safeTy PrecauTions

safety Warning labels

BEFORE USING YOUR PRODUCT:

The following safety warnings are located in site specific areas on the Bowflex

®

TreadClimber

®

fitness

machine. All locations are given as if you were standing on the fitness machine ready to exercise. Please read all safety precautions and warning
information prior to using your product. Be sure to replace any warning label if damaged, illegible, or missing. If you do not have, or cannot find, or need
to replace a warning label or product Owner’s Manual please call 1-800-NAUTILUS (800-628-8458) to obtain a new label or new manual.

Label 1:

”Warning: Obtain, read and understand the owner’s manual provided with this fitness equipment prior to use.

Misuse or abuse of this equipment may lead to serious injury or death.
Keep children away. This equipment is intended for adult use only.
Replace this or any other warning label if damaged, illegible or missing.
Intended for consumer use only, not for commercial application. “

Location:

Left side of the console on the inside of the tray.

Label 2:

“Warning: Moving part can crush and cut.

Keep guard in place.
Lock out power before servicing.”

Location:

Beneath the rear step cover on the left side of the base assembly frame.

Label 3:

“Danger: Hazardous voltage.

Contact will cause electric shock or burns.
Turn off and lock out power before servicing.

Location:

Beneath the rear step cover on the right side of the base assembly frame.

Label 4:

“Warning: Moving parts can crush and cut.

Keep guard in place.
Lock out power before servicing.”

Location

: At the rear of the fitness machine on the left outer side of the

base frame beneath the left drive plastic cover.

Label 5:

“Warning: When Lever is in TreadClimber position test that the

Lever is correctly locked by the hook by pulling the
Lever to the right.”

Location

: To the right side of the treadle locking mechanism on the

top of the base frame assembly plastic cover.

Label 4

Label 3

Label 2

Label 1

Label 5

«
...
7
8
9
10
11
...
»

Содержание TreadClimber TC5300





















































Отзывы:

Нет отзывов

Похожие инструкции для TreadClimber TC5300

Бренд: GE Страницы: 698

Бренд: Facsimile Страницы: 16

Бренд: DBX Bushido Страницы: 12

Бренд: Hach Страницы: 66

Бренд: Hach Страницы: 14

Бренд: Hach Страницы: 144

QuikChem 8500 2 Series

Бренд: Hach Страницы: 80

Бренд: Hach Страницы: 178

Бренд: Hach Страницы: 32

Бренд: hager Страницы: 4

Lab companion SI-300

Бренд: Jeio tech Страницы: 69

IP Video Test Option HST-3000

Бренд: JDS Uniphase Страницы: 4

Бренд: Jct Страницы: 16

Бренд: lancer Страницы: 3

Бренд: lancer Страницы: 12

Бренд: R2 Страницы: 26

Бренд: PAT Страницы: 44

Бренд: Park Tool Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды