Bounty Hunter Snooper 2, Руководство пользователя, Страница: 4 / 16

4
EASY ASSEMBLY
searchcoil
searchcoil
Cable
Upper
Stem
Control
Housing
Plug
Lower
Stem
Assembling your Snooper 2 Met al
De tec tor is easy and re quires no
tools. Just fol low these steps:
●
1 Using the supplied bolt and
knurled
knob, at tach the
searchcoil to the low er stem.
●
2 Press the button on the up per
end of the lower stem and slide
the lower stem into the upper
stem.
Adjust the stem to a length that lets you
maintain a com fort able upright pos ture,
with your arm relaxed at your side.
●
3 Wind the searchcoil ca ble around
the stem. Leave enough slack in
the cable to let you ad just the coil
when you are hunting on uneven
ground. Then tight en the knob at
the end of the searchcoil.
Note: To adjust the coil,
simply loos en the knob.
●
4 Insert the coil’s plug into the
match ing con nec tor on the con trol
hous ing. Be sure the holes and
pins line up cor rect ly.
Caution:
• Do not force the plug in.
Excess force will cause dam age.
• To disconnect the cable, pull out
the plug. Do not pull on the ca ble.
Lower
Stem
Upper
Stem
Connector
on back of
control housing
Bolt
Knurled
Knob
Bottom view
Bottom side
Manual SNOOPER2-printer.qx_Snooper2-printer 11/17/14 11:11 AM Page 8