Bounty Hunter Snooper 2, Руководство пользователя, Страница: 11 / 16

11
PINPOINTING
Accurate pinpointing takes practice and is best ac com plished by
“X-ing” the sus pect ed target area.
●
1 Once a buried target is identified by a good tone re sponse,
continue sweep ing the coil over the target in a narrowing
side to side pattern.
●
2 Take visual note of the place on the ground where the
“beep” occurs as you move the coil slowly from side to
side.
●
3 Stop the coil directly over this spot on the ground.
●
4 Now move the coil straight for ward and straight back
towards you a couple of times.
●
5 Again make visual note of the spot on the ground at which
the “beep” occurs.
●
6 If needed, “X” the target at different angles to “zero in” on
the exact spot on the ground at which the “beep” occurs.
REMEMBER:
The detector will beep just as the center of the
searchcoil passes directly over the buried object.
If you have difficulty pinpointing very strong sig nals, try lifting
the coil higher off the ground until a weaker, but more concise,
signal is heard. For very weak signals, try moving the coil in
short quick sweeps, closer to the ground.
WHAT
READS
LIKE THIS
…MAY
ACTUALLY
BE THIS
IN THE FIELD
Manual SNOOPER2-printer.qx_Snooper2-printer 11/17/14 11:11 AM Page 13