INTRODUCTION
Thank you for choosing
Boundaryline
Sleek
Wall Solid
Fencing. This product will
provide you with many years
of trouble free protection if
installed in accordance with
the directions outlined in this
document.
-
This guide does not apply
to any fences over 1.8m in
height. If your fence is greater
than 1.8m, please seek further
advice from Boundaryline.
-
Describe your site details
when ordering materials.
-
Identify your soil type/
ground conditions. Refer to
Tape Measure
Square
Shovel
Circular Saw
Hex Drive Bit
Line Marking Paint
String Line
Drill/Driver
Angle Grinder
Post Hole Digger
Spirit Level
Safety Boots
Gloves
Helmet
Eye Protection
Hearing Protection
Sun Protection
-
Make sure you choose
the right tools before start
installing your fence.
BEFORE YOU START, READ THIS
TOOLS LIST
It is recommended that the reader pays particular attention to those items identified as IMPORTANT in this
manual to ensure satisfactory long-term performance.
!
IMPORTANT
the table in
Step 1
. This will
determine the concrete and
footing details required.
-
Make sure you are aware of
underground services before
you start digging! These could
be gas, electricity, or water
mains. Call your local council
for more information.
-
Check your local council
regulations on boundary
fencing.
-
Check the delivered material
for the correct number of
components and general
condition before beginning
your installation (see p.7).
The recommendations detailed
in this guide are formulated
along the lines of good
building practice. They are not
intended to be an exhaustive
statement of all the relevant
data.
If you have any questions,
please contact our Technical
Team on 0800 003 006. We
are always happy to help in
any way we can.
2
0800 003 006
/
boundaryline.co.nz
TOOLS
SAFETY GEAR
