Boundaryline SLEEKWALL SOLID, Инструкция по установке

Страница: 10 / 13

10 Install Guide - SleekWall
STEP-BY-STEP GUIDE
COVER CLIP
INSTALLATION
STEP 5
-
INSERT CHANNEL COVER CLIP
Once all your palings have been assembled you can now install the “Cover Clip”to the channel
to hide
all visible fixings.
Make sure the cover clip is the same length as your “Paling Channel” then you are ready to go.
The easiest way to do this is to use either a rubber mallet or the rubber handle of your hammer. Insert
one edge of the cover clip into the channel then with the rubber mallet/hammer handle from either
the top or bottom, Tap the other edge firmly, this will clip it into place. Work your way to the other end
until it is all secured in place.
Cover Clip hides screw
heads once fitted
It is important that the object you
use to tap the cover clip in with won’t
damage the powder coating.
Do not use the metal part of your
hammer, this will cause scratches or
dents.
!
IMPORTANT