Boston Whaler CONQUEST 345, Руководство пользователя

Страница: 69 / 206

2-22
Section 2 • General Information
345 Conquest
The neutral light will turn on.
2. The lights will blink if the
positions of the control
handles are not aligned with
the control handles at the
station you are transferring
from. Move the control
handles until the blinking
stops and the lights are solid.
NOTE: The lights will blink faster as the handles
are nearing their matched position.
3. Press and release the
TRANSFER button a
second time. A beep will be
heard. This completes the
transfer.
NOTE: Station transfer is
cancelled if not completed
within ten (10) seconds. Press and release the
TRANSFER button again to re-initiate a station
transfer.
4. Adjust the control handles
to the desired throttle and
gear position.
Station Transfer ( Cont’d)
METHOD 2
Immediate transfer: This method requires you
to press the TRANSFER button twice at the
control station where you want to take control.
This completes the transfer. Engine speed and gear
position will automatically adjust at a slow rate to
the handle settings at the new active station.
1. Press and release the
TRANSFER button two
times at the control station
where you want to take
control. Two beeps will be
heard ( one beep for each
button push). This
completes the transfer.
2. Adjust the control handles
to the desired throttle and
gear positions.
Avoid serious injury or death from loss of boat
control. The boat operator should NEVER LEAVE
THE ACTIVE STATION while the engines are in
gear. Helm transfer should only be attempted
while both stations are manned. One person
helm transfer should only be attempted while
engines are in neutral.
!
WARNING
PORT
CENTER
STBD
N
N
SYNC
TRANSFER
1 LEVE
R THROTTLE
ONL
Y
DOCK
PORT
CENTER
STBD
N
N
SYNC
TRANSFER
1 LEVER THROTTL
E
ONLY
DOCK
PORT
CENTER
STBD
N
N
SYNC
TRANSFER
1 LEVE
R THROTTLE
ONL
Y
DOCK
PORT
CENTER
STBD
N
N
SYNC
TRANSFER
1 LEVER THROTTL
E
ONLY
DOCK
POR
T
CENTER
STBD N
N
SYNC
TRANSFER
1 LEVER
THROTTLE
ONL
Y
DOCK
PORT
CENT
ER
STBD
N
N
SYNC
TRANSFER
1 LEVE
R THROTTLE
ONL
Y
DOCK
PORT
CENTER
STBD
N
N
SYNC
TRANSFER
1 LEVER THROTTL
E
ONLY
DOCK
POR
T
CENTER
STBD
N
N
SYNC
TRANSFER
1 LEVER
THROTTLE
ONL
Y
DOCK
Move the control handles until the blinking stops
and the lights are solid.
NOTE: The lights will blink faster as the handles are
nearing their matched position.
3. Press and release the TRANSFER button a sec -
ond time. A beep will be heard. This completes
the transfer.
NOTE: Station transfer is cancelled if not completed
within ten (10) seconds. Press and release the
TRANSFER button again to re-initiate a station
transfer.
4. Adjust the control handles to the desired throttle
and gear position.