Boston Whaler CONQUEST 345, Руководство пользователя

Страница: 128 / 206

3-35 345 Conquest
Section 3 • Systems & Components Overview & Operation Section 3 • Systems & Components Overview & Operation
345 Conquest
R
Section 3 • Systems & Components Overview & Operation
REFER TO THE MANUFACTURER’S MANUAL IN
YOUR OWNER’S MANUAL PACKET FOR COMPLETE
INSTRUCTIONS AND WARRANTY.
Trim Tab switch w/indicators
Fig. 3.35.1
DOWN
BOW
DOWN
BOW
UP UP
Zinc buttons (anodes) are installed on the trim tabs
to protect underwater hardware. Zinc, being less
noble than copper based alloys and aluminum used in
underwater fittings, will deteriorate first and protect
the less noble metals.
The zinc anodes generally need replacement once a
year in fresh water, every 6 months in a salt water
environment.
The need to replace anodes more frequently may
indicate a stray current problem within your boat or
at the slip or mooring. If your anodes do not need
replacement after one year, loose anodes or low-grade
zinc may be the problem.
Maintenance
The trim tabs are a completely sealed unit and are
waterproof and maintenance free.
Aside from a general cleaning when the boat is out
of the water you should also inspect the planes and
hinges for marine growth and remove as necessary.
Auto Glide Boat Control System
(Option)
If equipped, the Auto Glide uses engine and GPS
data to drive your boat to the most efficient running
angle by adjusting the trim tabs as needed.
With the Auto Glide, your boat’s running angle is
2
3
1
2
3
4
5
6
Auto Glide Key Pad (Option)
Fig. 3.35.2
AUTO
HOLD
FAV 2 FAV 1
DN DN
UP UP
LENCO
“AUTO” SETTING BUTTON
LED INDICATOR
PORT BOW DOWN BUTTON
PORT BOW UP BUTTON
FAVORITE 1 AUTOMATIC SETTING BUTTON
HORIZONTAL LED INDICATORS
FAVORITE 2 AUTOMATIC SETTING BUTTON
STARBOARD BOW UP BUTTON
STARBOARD BOW DOWN BUTTON
“HOLD” SETTING BUTTON
VERTICAL LED INDICATORS
1
4
5
6
2
2
2
7
8
9
10
11
7
8
9
10
11
measured 25 times per second. The data is used by
the Auto Glide control box to:
• Automatically put your boat in the most
efficient running angle.
• Reduce the amount of bow rise of your boat
during hole shot mode.
• Eliminate bow porpoising (bow bounce).
• Keep your boat level at all times.
The results of these actions is a smoother ride and
the best possible fuel efficiency.
Although you will most likely keep your Auto Glide
in automatic mode, you may convert to manual mode
simply by pressing one of the four up/down buttons
on the key pad.