Boston Whaler 150 Super Sport, Руководство пользователя

Страница: 61 / 82

3-7
170 Montauk
Section 3 • Systems & Components Overview & Operation
Livewell (Option)
If equipped, the livewell located in the aft cockpit
will keep baitfi sh alive by circulating fresh seawater
through the tank.
Before operating the system make certain the hull
seacock is in the open position. The seacock can be
accessed through the starboard access hatch on the
livewell.
Place the removable standpipe (supplied) in the drain
at the bottom of the livewell tank. The standpipe
serves as an overfl ow drain to control the level of the
water in the livewell while water is being circulated
through the system. A fl ow control valve (Figure
3.7.2) at the livewell water inlet controls the fl ow of
water into the livewell. To increase the water fl ow,
turn the valve counterclockwise. To decrease fl ow,
turn the valve clockwise.
Maintenance of the livewell system requires periodic
inspection of the raw water intake strainer and all
hose connections. Clean away debris and/or tighten
hose connections as required.
Maintenance
Operation
NOTICE
The seacock MUST be in the OPEN position
before activating the livewell pump. Running
the pump dry may cause damage to the unit.
Fill the livewell by pressing the switch marked
“ACCY” on the console switch panel (See fi gure
2.10.1).
A drain /overflow hose with a strainer, directs
overflow/excess water to the transom thru-hull
drain.
Livewell (Option)
Fig. 3.7.1
1
2
3
LIVEWELL TANK
FILL HOSE
LIVEWELL PUMP
DRAIN HOSE 4
5
6
7
8
2
1
3
5
6
7
8
NOTE: Boat shown with bow rail and
livewell options.
4
TRANSOM THRU HULL DRAIN
SEACOCK THRU HULL INTAKE FITTING
SEACOCK
LIVEWELL DRAIN
Livewell Flow Control Valve
Fig. 3.7.2
Decrease Flow
(Clockwise)
Increase Flow
(Counterclockwise)
170
Mo
nta
uk