2-6
170 Montauk
Section 2 • General Information
R
170 Montauk
Through Hull Fittings
Fig. 2.6.1
1
2
3
ANCHOR LOCKER DRAIN
BILGE SUMP DRAIN
BILGE PUMP OUTLET
LIVEWELL DRAIN (OPTION)
MOTORWELL DRAIN (2)
Location of Thru-Hull Fittings
NOTICE
• Depending on the type of boat you have, you may have underwater fi ttings. Any fi tting that will be
underwater needs to be plugged or the seacock needs to be closed.
• Through
hull
fi ttings should be checked for proper seal annually. When the boat is in the water the
underwater
fi ttings can be checked for dripping. It is recommended that the underwater fi ttings
be removed, cleaned and resealed every other year.
• If the through hull fi ttings need to be replaced, it is recommended that an authorized Boston
Whaler
®
dealer perform this type of repair. Through hull fi ttings that are improperly installed
can cause premature hull failure and may void the Boston Whaler
®
limited warranty.
4
1
2
3
5
NOTICE
A standard 1” “Snap-Tite” plug can be used to replace the drain plugs in your boat. It is recommended
that you carry spare plugs to be used in the event that the drain plugs issued with your boat become
lost or damaged.
4
5
Содержание 150 Super Sport
Страница 2: ......
Страница 54: ...2 22 170 Montauk Section 2 General Information R THIS PAGE INTENTIONALLY LEFT BLANK ...
Страница 70: ...4 6 170 Montauk Section 4 Electrical System Switch and Breaker Panel Schematic Fig 4 6 1 ...
Страница 82: ...5 12 Section 5 Care Maintenance R 170 Montauk THIS PAGE LEFT INTENTIONALLY BLANK ...