Bosslan BOSSW76 Скачать руководство пользователя страница 12

Страница: 12 / 43

3.4.1 Wireless Model

Change wireless mode for AP/WDS (Bridge) or AP Client. Here please select “

AP/WDS (Bridge)

”.

3.4.2 Wireless On/Off

This is to Select On or Off switch of the radio card. By selecting

OFF

all wireless functions of the Access Point will

turn disabled. (Default:

)

3.4.3 Visibility Status

This is for

Visible

Invisible

the

SSID during broadcasting. When the Invisible is selected, the SSID will not be

broadcasted in the beacons, so the clients has to know the networking name (SSID) to associate with this

Access Point. Enabling this feature the SSID will broadcast the SSID across the network.

3.4.4 SSID

(Access point mode only) SSID (Service Set Identifier) is the name designated for a specific wireless local area

network (WLAN) and provided by Access Point. Clients that want to connect to the WLAN through the access

point must set their SSID to the same as that of Access Point. (Default:

oem_ag

; Range: 1-32 characters could

be input).

3.4.5 Transmission rate (Mbits/s)

This option indicates the transmission rate of the AP/WDS (Bridge).The Transmission rate is the rate at which the

access point transmits uni-cast packets on the wireless interface. The maximum transmission distance is

affected by the data rate. The lower the data rate, the longer the transmission distance. (Options: Best

(automatic), 54 (108), 48( 96), 36 (72), 24 (48), 18 (36), 12 (24), 9 (18), 6 (12), 11, 5.5, 2, 1 Mbps; Default :

Best

(automatic)

3.4.6 802.11 Mode

This setting controls the types of 802.11 wireless clients or stations that can connect to this AP. The wireless

mode allows the user to select whether this AP will connect to an 802.11b only network, an 820.11g only network,

Содержание BOSSW76












































Результаты поиска

Содержание BOSSW76

Отзывы:

Похожие инструкции для BOSSW76

Бренды по названию

Популярные бренды

Bosslan BOSSW76, Руководство пользователя

Результаты поиска

Содержание BOSSW76

Отзывы:

Похожие инструкции для BOSSW76

Бренды по названию

Популярные бренды