42
4.6.2 RTS threshold
This value should remain at its default setting of 2346. If you encounter inconsistent data flow, only minor
modifications to the value range between 256 and 2346 are recommended.
4.6.3 Beacon period
Beacons are packets sent by an access point to synchronize a network. Specify a beacon interval value. The
default (
100
) is recommended.
4.6.4 DTIM interval
(Delivery Traffic Indication Message) Select a setting between 1 and 255.
1
is the default setting. DTIM is a
countdown informing clients of the next window for listening to broadcast and multicast messages.
4.6.5 802.11d
Check this box to enable support for sending regional information to the stations. (Default:
Disable
)
4.6.6 Transmit Power
Normally the wireless transmitter operates at
Full
power. In some circumstances, however, there might be a need
to isolate specific frequencies to a smaller area. By reducing the power of the radio, you can prevent transmissions
from reaching beyond your corporate/home office or designated wireless area.
Select the level of Transmit Power:
Full / Half / Quarter / Eighth / Min
. (Default:
Full
)
