14
3.4.10 Channel
This is the radio channel that the Access Point will use which represents a narrow band of radio frequency. It is
important that the frequencies do not overlap to impact the data packets transmission quality. To avoid
interference within the network with multiple APs, set each AP to use one of the 3 channels (e.g. channel 1) and
then the other AP to be one of the other 2 channels (e.g. channel 5 or channel 10). Note that 802.11b and
802.11g use only 2.4 GHz channels and 802.11a only 5.0 GHz channels. All devices on the network must share
the same channel. (Default:
5.200 GHz – CH40 for 802.11a
)
