Boss MS-3 Скачать руководство пользователя страница 22

Страница: 22 / 49

EFFECT

TAPE (TAPE ECHO)

Parameter

Value

Explanation

TIME

(DELAY TIME)

1 ms–2000 ms,
BPM –

Adjusts the delay time.
* When set to BPM, the value of each

parameter will be set according to

the value of the “MASTER BPM” (p. 26)

specified for each patch. This makes it

easier to achieve effect sound settings

that match the tempo of the song.

* If, due to the tempo, the time is longer

than the range of allowable settings, it

is then synchronized to a period either

1/2 or 1/4 of that time.

FEEDBACK

0–100

Adjusts the volume that is returned to

the input. A higher value will increase

the number of the delay repeats.

E.LEVEL

(EFFECT LEVEL)

0–120

Adjusts the volume of the delay sound.

HIGH CUT

630 Hz–12.5 kHz,

FLAT

Adjusts the frequency at which the high

cut filter begins to take effect. When

“FLAT” is selected, the high cut filter will

have no effect.

D.LEVEL

(DIRECT LEVEL)

0–100

Adjusts the volume of the direct sound.
100=±0 dB

MODULATE

Parameter

Value

Explanation

TIME

(DELAY TIME)

1 ms–2000 ms,
BPM –

Adjusts the delay time.
* When set to BPM, the value of each

parameter will be set according to

the value of the “MASTER BPM” (p. 26)

specified for each patch. This makes it

easier to achieve effect sound settings

that match the tempo of the song.

* If, due to the tempo, the time is longer

than the range of allowable settings, it

is then synchronized to a period either

1/2 or 1/4 of that time.

FEEDBACK

0–100

Adjusts the volume that is returned to

the input. A higher value will increase

the number of the delay repeats.

E.LEVEL

(EFFECT LEVEL)

0–120

Adjusts the volume of the delay sound.

MOD RATE

(MODULATION RATE)

0–100

Adjusts the modulation rate of the delay

sound.

MOD DEPTH

(MODULATION DEPTH)

0–100

Adjusts the modulation depth of the

delay sound.

HIGH CUT

630 Hz–12.5 kHz,

FLAT

Adjusts the frequency at which the high

cut filter begins to take effect. When

“FLAT” is selected, the high cut filter will

have no effect.

D.LEVEL

(DIRECT LEVEL)

0–100

Adjusts the volume of the direct sound.
100=±0 dB

TERA ECHO

Parameter

Value

Explanation

TIME

0–100

Adjusts the delay time.
* When set to BPM, the value of each

parameter will be set according to

the value of the “MASTER BPM” (p. 26)

specified for each patch. This makes it

easier to achieve effect sound settings

that match the tempo of the song.

* If, due to the tempo, the time is longer

than the range of allowable settings, it

is then synchronized to a period either

1/2 or 1/4 of that time.

FEEDBACK

0–100

Adjusts the volume that is returned to

the input. A higher value will increase

the number of the delay repeats.

E.LEVEL

(EFFECT LEVEL)

0–100

Adjusts the volume of the delay sound.

TONE

-50–+50

Adjusts the tone.

HOLD

OFF, ON

The effect sound is held when you turn

this on.
* Patches are written with the HOLD

parameter set to Off.

D.LEVEL

(DIRECT LEVEL)

0–100

Adjusts the volume of the direct sound.
100=±0 dB

MODE

Selects the mode of effect sound.

MONO

This effect sound outputs the same

sound from both L channel and R

channel.

STEREO1

This is a stereo effect sounds that adds

different effect sounds to L channel and

R channel.

STEREO2

This stereo effect sound uses spatial

synthesis, with the direct sound output

in L channel and the effect sound output

in R channel.

* If a mono effect or a loop is connected after this effect, the stereo effect is lost.

Содержание MS-3


















































Результаты поиска

Содержание MS-3

Отзывы:

Бренды по названию

Популярные бренды

Boss MS-3, Руководство по параметрам

Результаты поиска

Содержание MS-3

Отзывы:

Бренды по названию

Популярные бренды