19
EFFECT
RING MOD
Parameter
Value
Explanation
MODE
Selects the mode for the ring modulator.
NORMAL
This is a normal ring modulator.
INTELLIGENT
By ring-modulating the input signal, a
bell like sound is created. The intelligent
ring modulator changes the oscillation
frequency according to the pitch of the
input sound and therefore produces a
sound with the sense of pitch, which is
quite different from NORMAL.
This effect does not give a satisfactory
result if the pitch of the guitar sound is
not correctly detected. So, you must use
single notes, not chords.
FREQ
(FREQUENCY)
0–100
Adjusts the frequency of the internal
oscillator.
E.LEVEL
(EFFECT LEVEL)
0–100
Adjusts the volume of the effect sound.
D.LEVEL
(DIRECT LEVEL)
0–100
Adjusts the volume of the direct sound.
100=±0 dB
* If a mono effect or a loop is connected after this effect, the stereo effect is lost.
DLY (DELAY)
DLY lets you choose from various types of delay.
This effect adds delayed sound to the direct sound, giving more body
to the sound or creating special effects.
Parameter
Value
Explanation
ON/OFF
OFF, ON
Turns this effect on/off.
TYPE
Refer to DLY TYPE
How to choose TYPE
1
Press the [EDIT] button
0
Choose “DLY.”
2
Choose “TYPE” with the [3] knob.
DLY TYPE
This is a list of the effects that can be selected for DLY.
TYPE
Explanation
SINGLE
This is a simple mono delay.
PAN
This delay is specifically for stereo output. This allows you to
obtain the tap delay effect that divides the delay time, then
deliver them to L channel and R channel.
INPUT
OUTPUT L
OUTPUT R
FEEDBACK
DELAY TIME
EFFECT LEVEL
DELAY
TAP TIME
STEREO
The direct sound is output from L channel, and the effect
sound is output from R channel.
DUAL-S
(DUAL-SERIES)
This is a delay comprising two different delays connected
in series. Each delay time can be set in a range from 1 ms to
1000 ms.
D1
D2
D1: DELAY 1
D2: DELAY 2
DUAL-P
(DUAL-PARALLEL)
This is a delay comprising two delays connected in parallel.
Each delay time can be set in a range from 1 ms to 1000 ms.
D1
D2
DUAL-L/R
This is a delay with individual settings available for L channel
and R channel. Delay 1 goes to L channel, Delay 2 to R
channel.
D1
D2
L
R
REVERSE
This produces an effect where the sound is played back in
reverse.
ANALOG
This gives a mild analog delay sound. The delay time can be
set within the range of 1 to 2000 ms.
TAPE
(TAPE ECHO)
This setting provides the characteristic wavering sound of
the tape echo. The delay time can be set within the range of
1 to 2000 ms.
MODULATE
This delay adds a pleasant wavering effect to the sound.
TERA ECHO
This effect uses MDP (Multi-Dimensional Processing)
technology to create a unique ambience and a spaciousness
that changes according to your picking dynamics.
