Boss Snowplow MSC13950, Руководство по установке

Страница: 3 / 12

Important:
The fuel tank is located directly
behind the side plate. Remove the fuel tank
or place a steel plate between the fuel tank
and side plate to prevent damaging the tank.
3. Secure the hydraulic manifold mounting bracket
to the machine using 3 bolts (3/8 x 1 inch), 3 flat
washers, and 3 nylon locknuts (
Figure 6 ).
g303474
Figure 6
1. Nylon locknut (3/8 inch) 3. Bolt (3/8 x 1 inch)
2. Flat washer (3/8 inch) 4. Hydraulic manifold
mounting bracket
4. Mount the hydraulic manifold assembly to the
mounting bracket using 2 bolts (3/8 x 3/4 inch)
as shown in
Figure 7 .
g303475
Figure 7
1. Hydraulic manifold
assembly 2. Bolt (3/8 x 3/4 inch)
5. Route the BOSS hydraulic-manifold wire
harness over the fuel tank and connect it to the
auxiliary-power connector on the wire harness
of the machine (
Figure 8 ).
g036938
Figure 8
1. Controller connector 2. Auxiliary-power connector
6. Connect the BOSS hydraulic-manifold wire
harness to the controller connector (
Figure 8 ).
7. Secure the BOSS hydraulic-manifold wire
harness to the wire harness of the machine with
cable ties.
3