Boss Snowplow MSC13950, Руководство по установке, Страница: 5 / 12

3. Apply a thin film of hydraulic fluid to the filter and
install the filter head, filter, and 45° hose fitting to
the fitting in the T port on the manifold as shown
in
Figure 12 .
Note:
Ensure that the flow arrow on the filter
head is pointing away from the manifold.
g245708
Figure 12
1. 45° hose fitting 3. Filter
2. Filter head
4. Install a 90° fitting and hose to the 45° fitting on
the filter.
5. Install a 90° fitting and hose to the manifold.
6. Place a drain pan under the manifold block of
the left hydrostatic drive (
Figure 13 ).
g303477
Figure 13
1. P-port hose
4. Manifold block
2. Filter hose 5. Inner port
3. Skid plate 6. Outer port
7. Remove the manifold block ( Figure 13 ).
Note:
You may need to remove the rear bolt
from the transmission skid plate, loosen the front
bolt, and rotate the skid plate in order to remove
the manifold block.
8. Route the filter hose (short 90° fitting) between
the lift arm and frame (
Figure 14 ), and connect it
to the outer port on the hydrostatic drive ( Figure
13 ).
5