Boss Industries Bullet 2, Руководство пользователя по обслуживанию и техническому обслуживанию

Страница: 20 / 49

20 309003
Before adding or changing compressor oil, make sure that the compressor is completely relieved of
pressure. The drain is located inside the service door on the bottom of the sump tank. Oil is added at the
fill cap on the side of the machine above the sightglass. The proper oil level is in the middle of the oil
sightglass, when the unit is shut down and has had time to settle. The machine must be level when checking
the oil. DO NOT OVERFILL. The oil capacity is given in “Compressor Specifications”.
Maintenance
7.7Air Intake Filter
The air intake filter is a heavy-duty dry type high efficiency filter designed to protect the compressor
from dust and foreign objects.
Frequency of maintenance of the filter depends on dust conditions at the operating site. The filter
element must be serviced when clogged. A clogged air filter element will reduce compressor performance
and cause premature wear of components.
Do not attempt to drain condensate, remove the oil level fill cap, or
break any connection in the air or oil system without shutting off
the compressor and relieve the system of all stored air pressure.
Due to environmental factors, the useful life of all “extended life”
lubricants may be shorter than quoted by the lubricant supplier. Boss
Industries Inc. encourages the user to closely monitor the lubricant
condition and to participate in an oil analysis program with the supplier.
No lubricant, however good and/or expensive, can replace proper
maintenance and attention. Select and use it wisely.