Boss Audio Systems BPRZR5, Руководство по установке

Страница: 23 / 24

- 22 -
BPRZR5
IPX6 RATED 1000 WATTS TRUE PLUG-N-PLAY
POLARIS RZR XP1000 5 SPEAKER AUDIO SYSTEM KIT
INSTALLATION MANUAL INSTALLATION MANUAL
BPRZR5
IPX6 RATED 1000 WATTS TRUE PLUG-N-PLAY
POLARIS RZR XP1000 5 SPEAKER AUDIO SYSTEM KIT
Lower dash mounting
1.
Locate the lower dash pocket and remove the lower dash pocket panel from your RZR.
2.
Fasten both the lower dash mount panel and the metal brace plate to the lower dash pocket panel of your
RZR.
a.
Find the lower dash mount panel from the supplied mounting kit, and locate the four hole marks
indicated as “ MGV550B ” on the back side of the lower dash mount. Then use a proper tool to drill these
four holes as mounting holes.
b.
Correctly orientate the lower dash mount and the metal brace plate, then fix both to the lower dash
pocket panel of your RZR by using the supplied hexagon screws.
a
b
Drill 4 holes
Lower dash mount panel
Lower dash mount panel
Lower dash pocket
panel of your RZR
Metal brace plate
3.
Fix the source unit to the 3-in-1 panel (Lower dash mount panel, lower dash pocket panel of your RZR and
metal brace plate are fastened together as described in Step 2 above).
a.
Use a proper tool to drill four holes into the lower dash pocket panel of your RZR for screw fastening, by
using the four mounting holes which are previously drilled (see Step 2) on the lower dash mount panel.
b.
Remove the trim plate from the front panel of the source unit to access the four screw holes on the left
and right edges of the source unit.
c.
Fix the source unit to the 3-in-1 panel using four supplied screws and flange nuts.
IMPORTANT! When sliding the flange nut on the bolt, make sure the wide flat face of the nut points
inward (toward the metal plate) to provide more locking effect.
a
c
b
Trim plate
Source unit
(MGV550B)
3-in-1 panel ( Lower dash mount
panel, lower dash pocket panel of
your RZR and metal brace plate are
fastened together)
Drill holes into the lower dash
pocket panel of your RZR
4.
After the source unit is fixed, secure it in the place where the lower dash pocket sits. Finally, replace the
trim plate.
0821