- 15 -
BPRZR5
IPX6 RATED 1000 WATTS TRUE PLUG-N-PLAY
POLARIS RZR XP1000 5 SPEAKER AUDIO SYSTEM KIT
INSTALLATION MANUAL
INSTALLATION MANUAL
BPRZR5
IPX6 RATED 1000 WATTS TRUE PLUG-N-PLAY
POLARIS RZR XP1000 5 SPEAKER AUDIO SYSTEM KIT
RZR-62A Rear Speaker enclosure installation
1.
Mount the main RZR-62A to the driver side rear of the roll cage in sure preferred location.
Take blind spots into consideration when mounting the RZR-62A to help ensure safety and visibility when
out of the trail. Follow the guidelines below for proper clamp installation.
STEP4
STEP3
STEP2
STEP1
Two screws can be unbolted to loosen the metal
base of mounting band to adjust the mounting
angle. Making sure to put all components of the
mounting hardwares in a safe location.
After loosening two bolted screws and then twist
the metal base to determine the optimal location
for your speakers onto the roll cage of your RZR.
And then re-bolted two screws in place to secure
the metal base of mounting band tightly.
Place the front rubber pad on the metal base of
the mounting clamp.
Place the supplied rubber strip arround the cage
bar to prevent scraching. Push the aluminum band
over the cage bar. Align the a luminum bands with the metal
base of mounting bands on the waketower speaker.
Installation instruction
Two screws can be unbolted to loosen the metal
base of mounting band to adjust the mounting angle.
Make sure to put all components of the mounting
hardwares in a safe location.
After loosening two bolted screws, then twist the
metal base to determine the optimal location for your
speaker onto the roll cage of your RZR.
Then re-bolt two screws in place to secure the metal
base of the mounting band tightly.
