- 17 -
BPRZR5
IPX6 RATED 1000 WATTS TRUE PLUG-N-PLAY
POLARIS RZR XP1000 5 SPEAKER AUDIO SYSTEM KIT
INSTALLATION MANUAL
INSTALLATION MANUAL
BPRZR5
IPX6 RATED 1000 WATTS TRUE PLUG-N-PLAY
POLARIS RZR XP1000 5 SPEAKER AUDIO SYSTEM KIT
2.
Route the input signal cable from the right rear speaker to the rear left (main) speaker.
Follow the factory wiring, avoid heat sources, sharp edges, and rotating parts when routing the cable.
3.
Route RZR-62A power, ground, RCA inputs, and remote turn on wire to the center console of the vehicle.
The power and ground will stop at the battery. The RCA inputs and remote turn on wire will continue down
the center of the vehicle.
Remove the fuse from the RZR-62A fuse holder. Do not connect to power until the end of the BPRZR5
installation.
4.
Route the RZR-62A RCA inputs and remote turn on wire out of the inside of the vehicle to follow up the
exterior of the fire wall. They will then be fed through the outside of the firewall grommet to the inside of
the dash cavity.
