- 21 -
BPRZR5
IPX6 RATED 1000 WATTS TRUE PLUG-N-PLAY
POLARIS RZR XP1000 5 SPEAKER AUDIO SYSTEM KIT
INSTALLATION MANUAL
INSTALLATION MANUAL
BPRZR5
IPX6 RATED 1000 WATTS TRUE PLUG-N-PLAY
POLARIS RZR XP1000 5 SPEAKER AUDIO SYSTEM KIT
5.
Install the source unit in your dash (see section “MGV550B Source Unit installation). Then make your final
connections to the MGV550B.
MGV550B Source Unit installation
With the supplied source unit mounting kit (BPRZRD/BPRZR5D), you can install the MGV550B source unit in
the place where the factory dash pocket sits. The dash pocket can be the upper or lower one, depending on
the configuration of your Polaris RZR model.
Upper dash mounting
1.
Remove the push pins that secure the upper dash pocket, and set aside the push pins for the source unit
mounting. Then remove the upper dash pocket by tilting it away from the dash.
2.
Fasten the source unit to the mounting kit.
a.
Remove the trim plate from the front panel of the source unit to access the four screw holes on the left
and right edges of the source unit.
b.
Fix the source unit by using the upper dash mount panel, metal brace plate, and four supplied bolts
and flange nuts.
IMPORTANT!
When sliding the flange nut on the bolt, make sure the wide flat face of the nut points
inward (toward the metal plate) to provide more locking effect.
a
b
Trim plate
Source unit
(MGV550B)
Upper dash mount panel
Metal brace plate
Flange nut
Bolt
3.
After the source unit is fastened to the dash mount panel, secure the dash mount panel in the place where
the previous upper dash pocket sits by using the push pins. Finally, replace the trim plate.
